مظلة غشائية معمارية لفندق هيلتون ديلي

تم تحسين مساحات الترفيه الضيافية في تيمور الشرقية من خلال هذا التركيب الغشائي PVDF ذي الحواف الكابولية بمساحة 163 مترًا مربعًا. مصمم لرياح تصل سرعتها إلى 180 كم/ساعة، يندمج الغشاء المعماري بسلاسة مع إطار الفندق الحالي لتوفير تظليل دائم على السطح.

الموقع

تيمور الشرقية

المساحة (م²)

163 متر مربع

سرعة الرياح

سرعة الرياح 180 كم/ساعة

تاريخ الإنجاز

09/2021

صورة واقعية للمشروع

معرض صور الهيكل المكتمل
صور الحالة

نظرة عامة على المشروع

This project is located on the rooftop of the Hilton Hotel in Dili, Timor-Leste, and was completed in September 2021. It is a landscape tensile membrane structure for the hotel’s rooftop leisure area, featuring a cable-edge design. The canopy measures approximately 18 m × 9 m with a height of about 3 m, covering a total projected area of 163 sqm. The steel structure consumes approximately 2 tons of steel. The steel framework is treated with an epoxy zinc-rich primer and a Grey topcoat for corrosion protection, ensuring long-term durability. The roofing material is a white PVDF architectural membrane with a weight of 1100 g/sqm and a B1 fire rating, fully meeting safety requirements for public buildings.

تصور الرسم

التصور قبل التصنيع
التصميم والعروض

التحدي - الحل

Situated on a seaside hotel rooftop, the client requested additional shaded areas for the leisure space, with a structure that balances functionality and aesthetic appeal. The project was intended as a semi-functional, semi-scenic canopy. Key requirements included: Canopy with both sunshade functionality and modern visual appeal Structural integration with the main rooftop framework Compliance with wind load safety standards Based on the site conditions and client requirements, we designed a multi-level tensile membrane canopy supported by columns and cable edges. This solution ensures functional performance while highlighting the artistic flexibility of tensile membrane structures. A full structural analysis and safety verification were completed, and the final design was approved by the client.

التنفيذ في الموقع

مراحل التصنيع والتركيب
عملية البناء

التركيب - الدعم

أثناء البناء، قدم فريقنا الهندسي إرشادات في الموقع. نظرًا لقيود الموقع، لم تتمكن الآلات الكبيرة من الوصول إلى المنطقة، وتم تركيب الأعمدة يدويًا. مع الإشراف المهني، تم الانتهاء من المشروع في الموعد المحدد. تعزز المظلة الراحة في منطقة الترفيه على السطح بينما تعمل أيضًا كميزة معمارية جذابة.
المواصفات
نوع القماش PVDF
نوع الإطار شدّي / جمالون كابلات
حمل التصميم سرعة الرياح 180 كم/ساعة
عمر التصميم 25-30 سنة
الضمان 10 سنوات

احصل على تصميم وعرض سعر مجاني

سيقوم مهندسونا بالرد خلال 24 ساعة
نموذج استفسار المحفظة
تواصل عبر واتساب

مشاريع ذات صلة

Engineered 13 inverted tensile umbrellas for a Zhongshan rooftop. We overcame restricted space via step-by-step assembly and used heavy-duty PVDF.
Designed an elegant three-peak PVDF dining canopy for Xianglu Hotel. We used deep prefabrication to guarantee a zero-interference installation.
121㎡ single-peak tensile canopy in Qingyuan. Overcame site restrictions via integral lifting, utilizing weather-resistant 1100g PVDF membrane for an efficient, eco-friendly delivery.
يقع هذا التركيب من PVDF ذو القمم المتصلة في وجهة ترفيهية في قويتشو، ويوفر مقاومة قوية للعوامل الجوية على مساحة 1264 مترًا مربعًا. يدمج هيكل الظل للمنتجع إطارًا جمالونيًا ثابتًا وتصريفًا فعالًا.
طلب
عرض سعر المشروع

شاركنا متطلبات هيكلك الشددي. سيراجع خبراؤنا الهندسيون مشروعك ويقدمون حلاً أولياً مخصصاً خلال 24 ساعة.

أخبرنا عن مشروعك

نموذج الاستفسار المنبثق

100% آمن وسري

×
الدعم
فريق الدعم
               

مرحباً! 👋 كيف يمكننا مساعدتك اليوم؟

WhatsApp
اتصل بنا الآن
دعم البريد الإلكتروني
WhatsApp اتصال استفسار البريد الإلكتروني