Rooftop Swimming Pool Tensile Membrane Roof System in Foshan

This high-rise PVDF installation in Foshan covers 525㎡ and is engineered for 160 km/h coastal winds. The rooftop swimming pool tensile membrane roof delivers secure athletic shading atop elevated building structures.

Location

Foshan China

Coverage(M²)

525㎡

Wind Speed

Angin 160 km/j

Complete Date

05/2022

Project Reality

Photo Gallery of the Completed Structure
Case Photos

Project Overview

This project is located in Nanhai District, Foshan, Guangdong Province, China, and was finished by our company in May 2022. It covers a swimming pool of 30m x 10m. The roof measures 35m × 15m, with a projected area of approximately 525 m². The structure uses about 10 tons of steel, with a membrane coverage area of approximately 630m². The roof is covered with white PVDF architectural membrane (1100 g/m²), which meets B1 fire rating standards.

Drawing Visualization

Visualizing before fabrication
Design & Renderings

Challenge - Solution

The gym is located on the fourth floor, while the swimming pool is positioned on the rooftop of the fifth floor. As Foshan is situated in the southeastern coastal region of China and is frequently affected by typhoons, this project requires careful consideration of rooftop wind speed as well as material transportation challenges. Unlike ground-level installations, rooftop projects involve stricter requirements for structural design. The membrane structure must be designed based on the building’s load-bearing capacity, foundation conditions, and the existing structural framework, with corresponding structural checks and verification carried out to ensure safety and compliance.

On-site Execution

Fabrication & Installation phases
Construction Process

Installation - Support

During installation, cranes are employed to lift and deliver materials to the rooftop, effectively overcoming the challenges associated with high-elevation construction and limited on-site access. The foundation had to be built on the load-bearing beams at the outer edge of the building, which meant the installation was carried out at height. To make this workable and safe, we carefully positioned the foundations to match the existing beams and used cranes to lift materials to the rooftop, with proper safety measures in place throughout the process.
Spesifikasi
Jenis Fabrik PVDF
Jenis Rangka Struktur Kekuda
Design Load Angin 160 km/j
Design Life 25-30 Yrs
Jaminan 10 Years

Dapatkan Reka Bentuk & Sebut Harga Percuma

Jurutera kami akan membalas dalam masa 24 jam
Borang Pertanyaan Portfolio
Hubungi Melalui Whatsapp

Related Projects

Situated at a Zhuhai aquatic center, this arched rod-supported installation covers a 483㎡ training pool. The swimming pool canopy membrane structure integrates fire-rated PVDF for 180 km/h coastal wind durability.
Minta
Sebutharga Projek

Kongsi keperluan seni bina tensil anda dengan kami. Pakar kejuruteraan kami akan menyemak projek anda dan menyediakan penyelesaian awal yang disesuaikan dalam masa 24 jam.

Beritahu kami tentang projek anda

Pop Up Borang Pertanyaan

100% Selamat & Sulit

×
Sokongan
Pasukan Sokongan
               

Helo! 👋 Bagaimana kami boleh membantu anda hari ini?

WhatsApp
Hubungi Kami Sekarang
Sokongan E-mel
WhatsApp Panggil Pertanyaan E-mel