Sistema de Cobertura em Membrana Tracionada para Piscina em Cobertura em Foshan
Esta instalação de PVDF em altura em Foshan cobre 525㎡ e é projetada para ventos costeiros de 160 km/h. A cobertura em membrana tracionada para piscina em cobertura proporciona sombreamento atlético seguro sobre estruturas elevadas.
Localização
Foshan, China
Cobertura (M²)
525㎡
Velocidade do Vento
Vento 160 km/h
Data de Conclusão
05/2022
Visão Geral do Projeto
This project is located in Nanhai District, Foshan, Guangdong Province, China, and was finished by our company in May 2022. It covers a swimming pool of 30m x 10m. The roof measures 35m × 15m, with a projected area of approximately 525 m². The structure uses about 10 tons of steel, with a membrane coverage area of approximately 630m². The roof is covered with white PVDF architectural membrane (1100 g/m²), which meets B1 fire rating standards.
Desafio - Solução
The gym is located on the fourth floor, while the swimming pool is positioned on the rooftop of the fifth floor. As Foshan is situated in the southeastern coastal region of China and is frequently affected by typhoons, this project requires careful consideration of rooftop wind speed as well as material transportation challenges.
Unlike ground-level installations, rooftop projects involve stricter requirements for structural design. The membrane structure must be designed based on the building’s load-bearing capacity, foundation conditions, and the existing structural framework, with corresponding structural checks and verification carried out to ensure safety and compliance.
Instalação - Suporte
During installation, cranes are employed to lift and deliver materials to the rooftop, effectively overcoming the challenges associated with high-elevation construction and limited on-site access.
The foundation had to be built on the load-bearing beams at the outer edge of the building, which meant the installation was carried out at height. To make this workable and safe, we carefully positioned the foundations to match the existing beams and used cranes to lift materials to the rooftop, with proper safety measures in place throughout the process.
| Especificação | ||
|---|---|---|
| Tipo de Tecido | PVDF | |
| Tipo de Estrutura | Estrutura de Treliça | |
| Carga de Projeto | Vento 160 km/h | |
| Vida Útil de Projeto | 25-30 Anos | |
| Garantia | 10 Anos | |
Obter Design e Orçamento Grátis
Nossos engenheiros responderão em até 24 horas
Contato via Whatsapp
Projetos Relacionados
Localizada em um centro aquático em Zhuhai, esta instalação suportada por arcos de haste cobre uma piscina de treinamento de 483 m². A estrutura de membrana da cobertura de piscina integra PVDF com classificação de resistência ao fogo para durabilidade contra ventos costeiros de 180 km/h.

