نظام سقف قماشي لسطح مستشفى جينشازو

Situated on a Guangzhou hospital rooftop, this central single-column PVDF installation protects a 576㎡ leisure zone. The Fabric Roof System withstands coastal winds while providing functional lightweight shading for patients and staff.

الموقع

قوانغتشو، الصين

المساحة (م²)

576㎡

سرعة الرياح

سرعة الرياح 120 كم/ساعة

تاريخ الإنجاز

07/2022

صورة واقعية للمشروع

معرض صور الهيكل المكتمل
صور الحالة

نظرة عامة على المشروع

This project is located on the rooftop of a newly constructed hospital in Baiyun District, Guangzhou, China, and was completed in July 2022. The canopy features a central single-column and cable-edge design, measuring approximately 24 m × 24 m with a height of about 12 m, covering a total projected area of 576 sqm. The steel structure consumes approximately 3.6 tons of steel. The steel framework is treated with an epoxy zinc-rich primer and white topcoat for corrosion protection, enhancing durability. The roofing material is a 1100 g/sqm white PVDF architectural membrane with a B1 fire rating, fully meeting safety standards for public buildings.

تصور الرسم

التصور قبل التصنيع
التصميم والعروض

التحدي - الحل

Located on the hospital rooftop, the client requested a landscape tensile membrane canopy on the concrete framework, providing sunshade while leaving space for rooftop equipment such as central air conditioning units. The project was designed as a semi-functional, semi-scenic structure, with the following requirements: Canopy with both sunshade functionality and modern aesthetic appeal Structural integration with the main rooftop framework Compliance with wind load safety standards Based on site conditions and client requirements, we designed a solution combining a central single-column with cable-edge support and multi-level membrane panels along the perimeter. This design ensures functional performance while showcasing the artistic curves of tensile membrane structures. Full structural analysis and safety verification were completed, and the final design was approved by the client.

التنفيذ في الموقع

مراحل التصنيع والتركيب
عملية البناء

التركيب - الدعم

Installation was carried out entirely by our technical team. Due to site constraints, large machinery could not access the rooftop. However, through professional installation planning and on-site coordination, the project was completed on schedule and delivered successfully.
المواصفات
نوع القماش PVDF
نوع الإطار شدّي / جمالون كابلات
حمل التصميم سرعة الرياح 120 كم/ساعة
عمر التصميم 25-30 سنة
الضمان 10 سنوات

احصل على تصميم وعرض سعر مجاني

سيقوم مهندسونا بالرد خلال 24 ساعة
نموذج استفسار المحفظة
تواصل عبر واتساب

مشاريع ذات صلة

تُعزز سلامة المشاة في هاينان بواسطة هذا التركيب المنحني من PVDF على عارضة I يغطي 320 مترًا مربعًا. تتحمل مظلة التظليل من PVDF لممر المدرسة رياحًا شديدة تصل إلى 210 كم/ساعة لضمان قابلية استخدام الطلاب في الهواء الطلق على المدى الطويل.
يغطي هذا التركيب المستوحى من السحب والمحاكي للطبيعة من PVDF مساحة 1630 مترًا مربعًا من حركة مرور الطلاب الكثيفة في تشوهاي. صُمم لتحمل رياح تصل إلى 180 كم/ساعة، وتوفر مظلة ممر المدرسة حماية أساسية من الأشعة فوق البنفسجية وسلامة موثوقة للمشاة.
Located over a lakeside bridge in Nanning, this curved steel and PVDF structure enhances university campus circulation. The University Walkway Canopy protects a 366㎡ path while providing structural stability and optimized drainage.
This wave-shaped steel frame installation in Foshan utilizes fire-rated PVDF to enhance a 1286㎡ pedestrian corridor. The school pedestrian corridor canopy improves outdoor comfort for students through engineered shading and circulation.
طلب
عرض سعر المشروع

شاركنا متطلبات هيكلك الشددي. سيراجع خبراؤنا الهندسيون مشروعك ويقدمون حلاً أولياً مخصصاً خلال 24 ساعة.

أخبرنا عن مشروعك

نموذج الاستفسار المنبثق

100% آمن وسري

×
الدعم
فريق الدعم
               

مرحباً! 👋 كيف يمكننا مساعدتك اليوم؟

WhatsApp
اتصل بنا الآن
دعم البريد الإلكتروني
WhatsApp اتصال استفسار البريد الإلكتروني