Sistem Bumbung Fabrik untuk Bumbung Hospital Jinshazhou

Situated on a Guangzhou hospital rooftop, this central single-column PVDF installation protects a 576㎡ leisure zone. The Fabric Roof System withstands coastal winds while providing functional lightweight shading for patients and staff.

Location

Guangzhou, China

Coverage（M²）

576㎡

Wind Speed

Angin 120 km/j

Complete Date

07/2022

Project Reality

Photo Gallery of the Completed Structure

Case Photos

Project Overview

This project is located on the rooftop of a newly constructed hospital in Baiyun District, Guangzhou, China, and was completed in July 2022. The canopy features a central single-column and cable-edge design, measuring approximately 24 m × 24 m with a height of about 12 m, covering a total projected area of 576 sqm. The steel structure consumes approximately 3.6 tons of steel. The steel framework is treated with an epoxy zinc-rich primer and white topcoat for corrosion protection, enhancing durability. The roofing material is a 1100 g/sqm white PVDF architectural membrane with a B1 fire rating, fully meeting safety standards for public buildings.

Drawing Visualization

Visualizing before fabrication

Design & Renderings

Challenge - Solution

Located on the hospital rooftop, the client requested a landscape tensile membrane canopy on the concrete framework, providing sunshade while leaving space for rooftop equipment such as central air conditioning units. The project was designed as a semi-functional, semi-scenic structure, with the following requirements: Canopy with both sunshade functionality and modern aesthetic appeal Structural integration with the main rooftop framework Compliance with wind load safety standards Based on site conditions and client requirements, we designed a solution combining a central single-column with cable-edge support and multi-level membrane panels along the perimeter. This design ensures functional performance while showcasing the artistic curves of tensile membrane structures. Full structural analysis and safety verification were completed, and the final design was approved by the client.

On-site Execution

Fabrication & Installation phases

Construction Process

Installation - Support

Installation was carried out entirely by our technical team. Due to site constraints, large machinery could not access the rooftop. However, through professional installation planning and on-site coordination, the project was completed on schedule and delivered successfully.

Spesifikasi
Jenis Fabrik	PVDF
Jenis Rangka	Tensegrity / Kabel-Kekuda
Design Load	Angin 120 km/j
Design Life	25-30 Yrs
Jaminan	10 Years

Dapatkan Reka Bentuk & Sebut Harga Percuma

Jurutera kami akan membalas dalam masa 24 jam

Hubungi Melalui Whatsapp

Related Projects

Lihat Semua Projek

Kanopi Teduhan PVDF Koridor Sekolah Wenchang China

Keselamatan pejalan kaki di Hainan dipertingkatkan dengan pemasangan PVDF rasuk-I melengkung ini yang meliputi 320㎡. Kanopi teduhan PVDF koridor sekolah ini mampu menahan angin ekstrem 210 km/j untuk kegunaan pelajar jangka panjang di luar rumah.

Kanopi Koridor Sekolah untuk Projek Sekolah Rendah Ziqi Zhuhai

Pemasangan PVDF yang diilhamkan awan biomimetik ini meliputi 1630㎡ lalu lintas pelajar yang tinggi di Zhuhai. Direka untuk angin 180 km/j, Kanopi Koridor Sekolah ini memberikan perlindungan UV yang penting dan keselamatan pejalan kaki yang boleh dipercayai.

Kanopi Laluan Universiti untuk Projek Kampus Guangxi Minzu

Located over a lakeside bridge in Nanning, this curved steel and PVDF structure enhances university campus circulation. The University Walkway Canopy protects a 366㎡ path while providing structural stability and optimized drainage.

Kanopi Jambatan Laluan Sekolah untuk Koridor Pejalan Kaki Foshan China

This wave-shaped steel frame installation in Foshan utilizes fire-rated PVDF to enhance a 1286㎡ pedestrian corridor. The school pedestrian corridor canopy improves outdoor comfort for students through engineered shading and circulation.