Rooftop Swimming Pool Tensile Membrane Roof System in Foshan

This high-rise PVDF installation in Foshan covers 525㎡ and is engineered for 160 km/h coastal winds. The rooftop swimming pool tensile membrane roof delivers secure athletic shading atop elevated building structures.

Vị trí

Phật Sơn, Trung Quốc

Diện tích che phủ (M²)

525㎡

Tốc độ gió

Gió 160 km/h

Ngày hoàn thành

05/2022

Thực tế dự án

Thư viện ảnh công trình đã hoàn thiện
Ảnh dự án

Tổng quan dự án

This project is located in Nanhai District, Foshan, Guangdong Province, China, and was finished by our company in May 2022. It covers a swimming pool of 30m x 10m. The roof measures 35m × 15m, with a projected area of approximately 525 m². The structure uses about 10 tons of steel, with a membrane coverage area of approximately 630m². The roof is covered with white PVDF architectural membrane (1100 g/m²), which meets B1 fire rating standards.

Hình ảnh trực quan bản vẽ

Trực quan hóa trước khi chế tạo
Thiết kế & Hình ảnh dựng

Thách thức - Giải pháp

The gym is located on the fourth floor, while the swimming pool is positioned on the rooftop of the fifth floor. As Foshan is situated in the southeastern coastal region of China and is frequently affected by typhoons, this project requires careful consideration of rooftop wind speed as well as material transportation challenges. Unlike ground-level installations, rooftop projects involve stricter requirements for structural design. The membrane structure must be designed based on the building’s load-bearing capacity, foundation conditions, and the existing structural framework, with corresponding structural checks and verification carried out to ensure safety and compliance.

Thi công tại công trường

Giai đoạn Chế tạo & Lắp đặt
Quy trình xây dựng

Lắp đặt - Hỗ trợ

During installation, cranes are employed to lift and deliver materials to the rooftop, effectively overcoming the challenges associated with high-elevation construction and limited on-site access. The foundation had to be built on the load-bearing beams at the outer edge of the building, which meant the installation was carried out at height. To make this workable and safe, we carefully positioned the foundations to match the existing beams and used cranes to lift materials to the rooftop, with proper safety measures in place throughout the process.
Thông số kỹ thuật
Loại vải PVDF
Loại khung Kết cấu Giàn
Tải trọng thiết kế Gió 160 km/h
Tuổi thọ thiết kế 25-30 Năm
Bảo hành 10 Năm

Nhận Thiết kế & Báo giá Miễn phí

Kỹ sư của chúng tôi sẽ phản hồi trong vòng 24 giờ
Danh mục mẫu yêu cầu
Liên hệ qua Whatsapp

Dự án liên quan

Situated at a Zhuhai aquatic center, this arched rod-supported installation covers a 483㎡ training pool. The swimming pool canopy membrane structure integrates fire-rated PVDF for 180 km/h coastal wind durability.
Yêu cầu
Báo giá dự án

Chia sẻ yêu cầu về kiến trúc tensile của bạn với chúng tôi. Các chuyên gia kỹ thuật của chúng tôi sẽ xem xét dự án của bạn và cung cấp giải pháp sơ bộ phù hợp trong vòng 24 giờ.

Hãy cho chúng tôi biết về dự án của bạn

Biểu mẫu yêu cầu bật lên

100% Bảo mật & An toàn

×
Hỗ trợ
Đội Ngũ Hỗ Trợ
               

Xin chào! 👋 Chúng tôi có thể giúp gì cho bạn hôm nay?

WhatsApp
Gọi Cho Chúng Tôi Ngay
Hỗ Trợ Qua Email
WhatsApp Gọi Yêu Cầu Báo Giá Email